Search results for "hollow fiber membrane"

PBI mixed matrix hollow fiber membrane: Influence of ZIF-8 filler over H2/CO2 separation performance at high temperature and pressure

2020

High performance and commercially attractive mixed-matrix membranes were developed for H2/CO2 separation via a scalable hollow fiber spinning process. Thin (~300 nm) and defect-free selective layers were successfully created with a uniform distribution of the nanosized (~60 nm) zeolitic-imidazole framework (ZIF-8) filler within the polymer (polybenzimidazole, PBI) matrix. These membranes were able to operate at high temperature (150 °C) and pressure (up to 30 bar) process conditions required in treatment of pre-combustion and syngas process gas streams. Compared with neat PBI hollow fibers, filler incorporation into the polymer matrix leads to a strong increase in H2 permeance from 65 GPU t…

Experimental study of the anaerobic urban wastewater treatment in a submerged hollow-fibre membrane bioreactor at pilot scale

2011

The aim of this study was to assess the effect of several operational variables on both biological and separation process performance in a submerged anaerobic membrane bioreactor pilot plant that treats urban wastewater. The pilot plant is equipped with two industrial hollow-fibre ultrafiltration membrane modules (PURON¿ Koch Membrane Systems, 30m 2 of filtration surface each). It was operated under mesophilic conditions (at 33°C), 70days of SRT, and variable HRT ranging from 20 to 6h. The effects of the influent COD/SO 4-S ratio (ranging from 2 to 12) and the MLTS concentration (ranging from 6 to 22gL -1) were also analysed. The main performance results were about 87% of COD removal, efflu…

Experimental and computational investigation of hollow-fiber membrane modules for biomedical applications

2022

Single hollow fiber SLM extraction of polyamines followed by tosyl chloride derivatization and HPLC determination

2007

Determination of polyamines in biological fluids possesses medical diagnostic relevance. Despite the vast panel of analytical methods developed for polyamines they are not applied in routine clinical usage, mainly due to the time and labor consuming sample preparation step and complicated derivatization procedures. Thus, new simpler methods are needed. This paper describes a single hollow fiber SLM extraction method of polyamines followed by simple pre-column derivatization with tosyl chloride and HPLC-UV analysis. The influence of different parameters such as the extraction time, organic phase composition, acceptor pH, donor pH, acceptor volume, donor volume and stirring speed on the trans…

Optimized Continuous Application of Hyperpolarized Xenon to Liquids

2018

International audience; In recent years, NMR with hyperpolarized (HP) xenon inside functionalized host structures (e.g. cryptophanes) have become a potential candidate for the direct observation of metabolic processes (i.e. molecular imaging). A critical issue for real applications is the dissolution of the HP-gas in the liquid which contains the host. In this work, we present recent developments for an improved and controlled dissolution of HP-Xe in liquids using hollow fiber membranes and different compressor systems. The designed apparatus consists of a compressor and a membrane unit. The compressor provides HP-129 Xe continuously at small adjustable pressures and in a polarization-prese…

A parametric CFD study of hollow fiber membrane modules for hemodialysis

2022

Hemodialysis is a membrane-based process in which solute transport from the patient’s blood to a rinsing solution (dialysate) occurs by diffusion and ultrafiltration. Devices used in hemodialysis are cylindrical modules filled with hollow-fiber membranes which allow the removal of toxic substances and metabolic wastes from the blood, but inhibit the passage of proteins and cells to the dialysate. A predictive porous-media model of hemodialysis was developed and validated against experimental data. Unlike previous literature models, it requires only basic membrane properties (hydraulic and diffusive permeabilities and reflection coefficients) instead of relying on empirically adjusted global…

Influence of temperature on mass transfer in an incomplete trapping single hollow fibre supported liquid membrane extraction of triazole fungicides.

2008

The influence of temperature in a single hollow fibre supported liquid membrane extraction of triazole fungicides with a stagnant acceptor phase was investigated. The mass transfer parameters such as diffusion coefficient, flux and apparent viscosity were determined at temperature ranging from 278 K to 313 K. Increase in temperature led to an increase in diffusion coefficient and flux. The apparent viscosity also decreased with an increase in temperature. The degree of trapping in the acceptor phase influenced the mass transfer at higher temperature. At lower temperature, the transport of analytes from the donor solution through the donor-membrane interface and through the membrane mainly a…

Sub-critical filtration conditions of commercial hollow-fibre membranes in a submerged anaerobic MBR (HF-SAnMBR) system: The effect of gas sparging i…

2012

A submerged anaerobic MBR demonstration plant with two commercial hollow-fibre ultrafiltration systems (PURON®, Koch Membrane Systems, PUR-PSH31) was operated using municipal wastewater at high levels of mixed liquor total solids (MLTS) (above 22gL -1). A modified flux-step method was applied to assess the critical flux (J C) at different gas sparging intensities. The results showed a linear dependency between J C and the specific gas demand per unit of membrane area (SGD m). J C ranged from 12 to 19LMH at SGD m values of between 0.17 and 0.5Nm 3h -1m -2, which are quite low in comparison to aerobic MBR. Long-term trials showed that the membranes operated steadily at fluxes close to the est…

A porous media CFD model for the simulation of hemodialysis in hollow fiber membrane modules

2022

A computational model was developed to predict the performance of hollow fiber membrane hemodialyzers. Blood and dialysate were modelled as fluids flowing through two interpenetrating porous media. Concerning hydrodynamics, experimental Darcy permeabilities measured for commercial hemodialyzers were used for both compartments. Concerning mass transfer, both diffusion and ultrafiltration were simulated. On the blood side theoretical Sherwood numbers for parallel flow in pipes were adopted. On the dialysate side Sherwood numbers were derived from CFD predictions for regular hexagonal fiber bundles. Solute concentrations on the two sides were alternatively computed in an iterative way and were…

Influence of bundle porosity on shell-side hydrodynamics and mass transfer in regular fiber arrays: A computational study

2023

CFD predictions of the effects of a fiber bundle porosity on shell-side hydrodynamics and mass transfer under conditions of steady laminar flow were obtained. Fluid was assumed to flow around regular hexag-onal or square arrays of cylindrical fibers of different pitch to diameter ratios, yielding bundle porosities ranging from the theoretical minimum up to similar to 1. A large number of axial, transverse and mixed flow combinations were simulated by letting the axial and transverse flow Reynolds numbers and the trans-verse flow attack angle vary. Both fully developed and developing conditions (entrance effects) were con-sidered. The continuity and momentum equations, along with a transport…